Sponsored Links


June 2010
« May   Jul »

Closet Office 3

We are doing a lot of recycling in the closet office. Here is a progress shot of the current state of affairs.

The deck is salvaged from the old bedroom where the current office is. The shelving unit upper is the old closet shelf. The dividers are scrap 2×4’s from the Storage Project
The shelving unit bottom is salvaged from the old storage room. A note about the cubbys. They are 11” deep and 9” inside. the 2×4 dividers are 10” deep. This allows the client to store various papers in them as well as having easy access either from the top or either edge.

The arrival of the paperless office is a premature announcement.

The deck is shorter than the space available, by design. Home offices have a lot of cords, plugs, and paraphernalia around them. The cleats for the deck look like this.

The back cleat is screwed into the studs with 3” deck screws. The arms are screwed into the front and rear cleats even with our opening. This allows a space on the left for running our phone, internet, and networking cables as well as the various boxes they connect to. The right side will have a small shelving unit made from left over material from another project and will have a slot with a trash can underneath for trash and shredder materials.

Here is our closet office with the light on.

The light is deliberately placed so that the desk area has task lighting and the wall between the cubby unit and the deck does not have direct light. This translates into no glare on the monitor and soft reflected light on the walls. Which is why we painted this BEHR Ultra White. The down side to this is all the White outlets and plugs look grey. I am not an advocate of painting cover plates or outlets.

Quick note on the cubbys. The next person who paints them will swear a lot. Me, I painted before assembly.

But no day on this project would be complete without a trip into the attic. But we have a fax line and pre wire for a phone line.

Comments are closed.