Sponsored Links

Archives

October 2020
M T W T F S S
« Jan    
 1234
567891011
12131415161718
19202122232425
262728293031  

Door Stops and Drywall Patches

Doors and walls are dangerous together. Especially during puberty. Door slamming and banging is a favorite sport among a certain age group. Using a doorstop to prevent damage to your walls by the door pushing the knob through the wall is a good idea. There are many doorstops available.

These Doorstops suck. These are the cheapest ones available. Not just in cost but also in construction and durability.

Cheap door stops

These as you can see failed miserably. These are made by Stanley. They still suck.

In repairing damage to your wall, we will do a quick ‘tapeless drywall patch’. This is one hole that the homeowner started to repair the damage. Noble effort. The idea is great, the follow through is not. We want a square hole.

Cutting around the affected area

The first thing we need to do, is to square the hole. We are removing enough drywall to get past the cracked portion that the doorknob created. A drywall keyhole saw is the preferred tool for this.

Squaring the hole for the patch

Once we have our hole, take a scrap piece of drywall at least 2” larger in both dimensions than your hole.  We will make a ‘tapeless’ patch. We are going to remove an inch of drywall to leave a facepaper taping area.

Score the backside of the drywall so that you can carefully remove the edge piece so that the face paper remains. Do this with the other three sides. Your eyeballs are good enough to measure this as after the first cut, you can hold your patch up to the hole to see what else has to be removed.
Scoring the backside of our drywall patch

When you are done, your patch will look like this. We have eliminated needing a scrap of wood, screws, and drywall tape. This is for small repairs usually under 6” square.

Here is the front of our drywall patch using the face paper as our tape

Before we mud this in, we dry fit it to make sure that it will fit in our hole. Trim as necessary. It should fit snug, not tight.

Testing the fit of our patch before applying mud

Next we butter our hole with drywall mud. We are applying our mud to the surface to embed the ‘tape’ portion of our patch and the excess mud in our hole will seal the side edges when we install it.

Here we are prefilling our hole with mud applying enough to fill the gaps in our drywall and enough to fully embed the 'tape'

Insert the patch, and wipe it down, carefully so that you do not push it below the surface requiring more work.

Here is our patch in place, wiped down first coat

It will look like this. Let it dry as long as it needs to. With premixed mud, it is 24 hours. You can use “Speed Set”, which is taping compound that comes as a dry powder that you mix up yourself. It comes in 45, 90 minute times. It hardens chemically like concrete, but is a lot easier to sand. 45 minute ‘speed set ‘ has a working time, before it begins to harden and create a mess, about 1/3rd of the time (15 minutes)on the bag. You will need at least one more coat of mud before you sand.

Speed set is handy to have around, doesn’t dry out, and has an incredible shelf life. The down side is that it comes in big bags.

This particular wall was textured with a splattered ‘orange peel’, which requires more work. (don’t get me started on textured walls) The good news, is they sell spray textures in cans. so you can match this particular texture. One thing to remember, is that after you have re-textured, is to lightly sand the texture before you paint, so that the texture blends into the undamaged area. The texture on the undamaged area is smoother due to the paint that has been applied previously.

Finished and textured patch

Finally, before you repaint, put a quick coat of primer on the patch before you repaint the wall. This will hide the patch work that you did. Especially using semi or high gloss paints. Your finished repair should be invisible so that you can’t tell it ever happened.

Invisible repair

To insure that patching does not become a regular part of your life, replace all those bottom springy doorstops with a hinge mount stop like the one below. Take out one of the hinge pins, slide this on the pin, and set the pin back into the hinge. It is adjustable so you can limit the door travel. These were 99 cents at the home store.

Better Doorstops